LAW - TinkerMill Intro to Stained Glass- Weekday Series! 9/11, 9/13 and 9/15

Date and Time for this Past Event

• Mon, Sep 11, 2023 - Fri, Sep 15, 2023  6pm - 9pm

Location

visit website

Details

NOTICE: This is a 3-PART WORKSHOP! You will need to attend all three days in succession in to order to complete the class and your project. We cannot mix and match weeks in which you attend.

Welcome to the Stained Glass shop!

This introductory class will be geared toward the curious person who has
never done the craft before, or has had experience doing stained glass
art in the past but is seeking a refresher of the basics! Framing/edging
of the pieces or application of patinas is not covered in this
course but may be discussed for context purposes. We WILL add hanger
loops to your finished projects so you can hang them up with pride in
your window at home!

COST: $165 for non-members, 25% off for members!

After this class, you will:

*Know how to cut glass
*Know how to shape the glass after cutting it
*Know how to prep, foil, solder, and finish a piece
*Have something colorful to take home and show off to your friends!
*Have the knowledge of how to use the space and materials, so you can create stained glass art on your own!

Class Pricing includes:

* Consumable materials (paper patterns, glue, glass, foil, wire, flux, solder, cleaners, and polish)
* Tool use (hand and powered tools)
* Small class sizes, for more individualized instruction
* Shop space usage (exclusive use of space during classes to students only)

CLASS AGENDA:
Day 1:

* Shop orientation & material pricing information (for future shop use, if you choose to use the space on your own afterwards)
* Pattern selection and prep
* Glass selection
* Glass cutting instruction & practice

Day 2:
* Glass grinder orientation & use instructions
* Fitment refinement
* Foiling & burnishing

Day 3:
* Soldering
* Finishing touches
* Polishing & cleanup

After
completing the class you will have all the skills needed to access the
stained glass shop at any time! Just remember those closed-toed shoes,
covered knees, and safety glasses. :)

____________________________________________________________________________

***PLEASE READ ALL DETAILS BELOW PRIOR TO REGISTERING FOR THIS CLASS***

____________________________________________________________________________

CANCELLATION POLICY

If you need to cancel your RSVP, the following policy applies:

2+ days away: full refund, please contact instructor for refund instructions.
Less than 2 days: no refund*, your registration is non-transferable and is considered a donation to the shop

Cancellation does not automatically get you an opportunity to reschedule. Any rescheduling is subject to existing class availability and instructor's discretion.

NO-SHOW POLICY

A no-show with no proof of timestamped attempted contact prior to the
start of the class will forfeit the class fees and the funds will be
considered a donation to TinkerMill, even if due to illness. Even if the
instructor does not get the message before class, if there is a
timestamp to show there was an attempt, it'll count as prior contact.
This can be via email, Slack message, carrier pigeon, etc.

*
If the need to cancel or a no-show is beyond your control, please speak
with the instructor to discuss. Resolution is subject to instructor's
discretion.

ATTIRE - COME PREPARED:

Closed-toed shoes and pants (or wearing a lap covering like an apron) long enough
to cover down to your knees at a minimum are required for safety
reasons. There is always a risk of hot solder splatter or glass shards
as projectiles while creating stained glass art.

It is very easy to get minor cuts on your hands during glass work. We have
a first aid kit and bandages on hand, but please note that you may get
nicks or cuts on your hands or fingers during this class. If you have a
medical bleeding disorder or similar health risk with skin wounds,
please keep this notice in mind

AGE RESTRICTION:
Class is open to anyone 18+ or those between ages of 14-17 with a
parent/guardian is also in attendance as another attendee. No
exceptions.

TOXIC MATERIALS WARNING:

This craft and class typically involves physical contact with LEAD, a
material known to potentially cause bodily and/or reproductive harm with
certain exposures, especially if ingested. We have a heavy-metals
removing hand soap available in the shop for handwashing, as well as
nitrile gloves available if you wish to eliminate/reduce physical
contact with the solder entirely (typical solder we use is a mix of 60%
lead and 40% tin). Feel free to bring gloves of your own if you wish,
but you will need finger dexterity (so nitrile-dipped gloves are good,
heavy leather work gloves are a bad idea).

In general, students are told to wash their hands thoroughly after handling any solder, any finished pieces, and any tools used in the shop - just don't lick the solder or any finished pieces, eat with unwashed hands after touching anything in the shop, and they should be fine. Lead-free solder is available upon special request for personal shop use, but will NOT be used in this class by default.

Additional Notes:

Do not make plans for immediately after the listed end time of class,
because this class could potentially run late. How late it goes depends
on the skills and efficiency of the students in every class. If you
think you'll need it, please bring a snack with you, as we do not have
any to give out. If you bring a water bottle or beverage, it must have a
lid. We can refill water bottles here!